ASUS EEE 1000HE AUDIO DRIVER

To reassemble your device, follow these instructions in reverse order. Once the two pieces are loosened enough, you can place your fingers between the two pieces and lift the top piece off. In order to detach the screen connector from the top left side of the motherboard you must peel back the tape holding down the fan wires. With the ribbons detached, you can now remove the front panel of the keyboard. Similarly, the hard drive must be disconnected from the netbook to remove the motherboard, so it must be removed prior to removing the speaker. Run the plastic opening tool along the side of the netbook while lifting upwards, keeping it wedged between the two asuss pieces. For all other guides, simply removing the hard drive from the PC shown in previous steps is the only necessary step.

Uploader: Nenris
Date Added: 22 May 2008
File Size: 30.34 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 71981
Price: Free* [*Free Regsitration Required]

Author with 3 other contributors. Step 5 Hard Drive. Run the plastic opening tool along the side of the netbook while lifting upwards, keeping it wedged between the two asuss pieces. Opening up the computer screen, find the 3mm auudio auxio housing to the inside of each hinge point.

For this step, orient the netbook with the screen folded down and the netbook flat on the ground with the back facing up.

The screws are marked by red circles. Locate the hinge points at the top of the netbook on each side.

Asus Eee PC 1000HE soundcard.

The right tab will remain in the unlocked position while the left tab must be held. Wedge the plastic opening tool between the two black layers of the netbook.

  8086 2A07 DRIVER DOWNLOAD

Next, remove the two 4mm screws on each side of the hard drive case shown by the blue circles. The side that is on the ground should not be ashs side that has the 7 mm screw you are trying to remove.

Eee PC HE Driver & Tools | Laptops | ASUS USA

For all other guides, simply removing the hard drive from the PC shown in previous steps is the only necessary step. Once the plastic piece is removed, the ribbon will spring free, but it will still be attached to the silver plate. Locate one back corner of the netbook ees where the screen meets the body of the netbook.

Identify the four connection points holding the top of the keyboard to the main body of the netbook. These are next to the 7mm screws you removed in the previous step. Hold the gold 3 mm screw housing in place using the black tweezers.

Locate three 7 mm screws to the right of the left hinge point in a vertical line. This is due to the wire connecting the two speakers located underneath the motherboard. Pull on the edge of the piece to remove it from the connection housing. Once the two pieces are loosened enough, you can asu your fingers between the two pieces and lift the top piece off. Similarly, the hard drive must be disconnected from the netbook to remove the motherboard, so it must be removed prior to removing the speaker.

Do not continue with the next 3 steps if you are not attempting to replace your hard drive.

  C MEDIA CM6206 DRIVER DOWNLOAD

The silver keyboard housing and the black piece are connected and make up the front panel. Small — px Medium — px Large — px.

Use the plastic opening tool or your hand to carefully lift the left hand side of the motherboard away from the bottom plastic casing.

The two inner black pieces of the hinge connection, between the screen and the netbook body, are attached to the front panel that you are removing. In order to detach the screen connector from the top left side of the motherboard you must peel back the tape holding down the fan wires.

The px on the right side aaudio the motherboard for the USB and other connections will pull free of the plastic housing when the motherboard is pulled to the aaudio. Locate the three 7 mm screws on the back panel, beneath where the battery would be located before removal. Mike Glenn Member since: Proceed to the next section instead.

Remove the pv network card from the motherboard to detach completely. In this step, a warning sticker covers one 7 mm screw. Run 1000hf plastic opening tool along the side of the netbook while lifting upwards, keeping it wedged between the two black pieces.

Author: admin